Furnace Blowing Cold Air in Draper, UT
What This Service Involves
Technicians trace the exact sequence of operation to see where heating stops. They test the thermostat W-terminal call, verify inducer draft pressure, measure flame-sensor microampere rectification, and check temperature rise across the heat exchanger to see if restricted airflow is forcing the limit switch open.
Whether you live in Hidden Valley or South Mountain, our referral line connects you with independent technicians familiar with Draper's elevation and winter heating demands. Depending on what diagnostics uncover, your call may also overlap with igniter and pilot repair or same-day furnace repair.
Common Warning Signs
- Air starts warm for 60 seconds and then turns cool while the fan keeps running
- Burners ignite for 3 to 5 seconds and immediately shut back off
- Thermostat fan switch is set to ON instead of AUTO
- Blower runs continuously even when the thermostat is turned down
Repair Process & Cost Factors
When an independent technician arrives at your Draper home, they perform a step-by-step safety and electrical inspection before quoting the repair. Final repair costs depend on OEM part availability, furnace accessibility, system age, and whether service is requested during standard daytime hours or after-hours dispatch. You can preview typical local ranges using our Draper Furnace Repair Cost Calculator or return to our Draper Furnace Repair homepage for full service details.
Frequently Asked Questions
That pattern usually points to an overheating furnace tripping the high-limit switch. A clogged MERV-13 filter, closed vents, or a failing blower motor slows airflow and triggers the safety cutoff.
Yes. When the flame sensor rod cannot detect the burner flame, the control board shuts off the gas valve within seconds while the blower continues running its cool-down cycle.
Need a local technician in Draper, UT? Call (385) 226-7672 to speak with our dispatch line 24/7.